Water is one great source of carpet damage especially in flood prone states such as Seattle. A water-damaged carpet poses a threat to health for everyone in the household or work place. The kind of water that soaked the carpet is determining factor whether the carpet can be salvaged or not. You definitely need to investigate what kind of water that flooded you carpet to be able assess if it is worth any effort of repair.

Water damaged restoration industry classified water depending on its source and any pollutants it may contain. Black water is the worst kind because it contains harmful contaminants usually coming from untreated industrial waste water. Any carpet that has been exposed to it is now likely to carry viruses and bacteria and can no longer be salvaged. The same must be disposed of properly for health reasons.

 

Water Damaged Carpet

Another kind of water that may soak your carpet is gray water. This is water coming from dishwashers, washing machines or even toilet overflows; so called gray due to its color and mild contents of pollutants. Carpets flooded by gray water are salvageable and may be restored. Carpets drenched with clean, clear water are the easiest to handle and the best to restore. However, in both cases the old, damaged padding should be discarded and replaced.

It is very important for any restoration effort to address the problem immediately. A wet carpet that remains damp for 12 hours or more can start to grow mold and pose serious health problems. Removal of molds from your home can be expensive and so you would not want to do that.

So, to restore your water-damaged carpet, you should follow some basic steps to do it right. First of all, you need to stop anymore water coming in by fixing the leak or shutting off the source. Then determine whether repair is feasible by the kind of water damage the carpet has sustained. If it is not salvageable, don’t waste your time and risk health issues by getting rid of it right away.

Next, you have to move the carpet away from the floor. Lift it up and, if possible, take it into the garage or outside; then tear the padding up and dispose of it in a safe manner. Keep the carpet elevated so that the air can circulate around it. While it is elevated start the cleanup of any remaining water in the room where the carpet came from; you don’t want any standing water there.

Fans and air conditioners can be used to circulate the air faster and help speed up the drying process in the room or building. After about ten to twelve hours the carpet should be ready to lay flat again. Once you lay it flat keep the air circulating and if you have a dehumidifier turn it on.

Always bear in mind that a carpet damaged by black water can no longer be salvaged. If you attempt to do it, you would only risk serious health problems for you and your family. Doing it right by following the steps above will save you a lot of money and despair in the long run. Water damage to a carpet can become really expensive if not acted on right away.

If you are looking for a highly recommended Seattle water damage restoration company, you need to go here : Top recommended Seattle water damage restoration Company