Any housekeeper or home maker will agree to the fact that the process of cleaning the bathroom in a house will consume a large amount of time as well as energy. But this is not a task which can be avoided and it will have to be done at least once in a week. When the size of the family is large, the need to clean the bathroom is likely to recur more often. But the overall process of cleaning the bathroom is not very difficult since the surface of all the bathroom fittings as well as tiles will not have stain deposits on them and they can be cleaned very easily.

One tip which can make the process of cleaning the bathroom easier is that any person who makes use of the bathtub or the shower stall should rinse it once his purpose has been achieved. Water should be sprayed all over the surface of the bath tub or the shower stall first and then soap or cleaning liquid will have to be applied using a damp sponge. Then water will have to be sprayed once again for rinsing. A towel can be used to wipe the walls of the shower stall after a shower in order to prevent the formation of mildew. The door of the shower stall should be left slightly open in order to prevent the formation of mildew.

White vinegar along with water can also be used in order to remove any tough stains which are present on the wall of the shower. A sponge can be dipped into this white vinegar solution in order to make the doors of the shower stall sparkling clean. Any scum which is found on the doors of the shower stall can be cleaned by making a solution of liquid fabric softener and warm water. The shower head should be opened up and soaked inside a vinegar solution in order to remove any deposits of minerals which can be found in them. An old toothbrush can also be used in order to remove these mineral deposits and a toothpick, an ice pack or a wire can used in order to clean the holes of the shower head.

Porcelain is the most common material which is used in making the bathtubs which can be seen in bathrooms. The process of installing bathtubs made of acrylic and fiberglass is much easier when compared to installing the porcelain bathtubs. A lot of people nowadays prefer to install acrylic and fiberglass bathtubs when they are renovating their bathrooms or when a bathtub needs to be installed in a house which is being newly constructed.

A non-abrasive powder or a liquid cleaner along with a damp sponge should be used in order to clean porcelain bathtubs. Any soil which has got deposited on the surface of the bathtub can be removed using a synthetic scrubbing pad and then rinsed properly using water. Extra care and precaution needs to be exercised while cleaning fiberglass bathtubs since scratches need to be avoided at all costs. A non-abrasive liquid cleaner along with a wet sponge should be used to clean fiber glass bath tubs.

Namami is a writer who has been writing articles online for years. She is also enthusiast of many subjects, including bedroom furniture, outdoor furniture, and home improvement. For more information, you can visit her latest website on shower stalls and shower curtain rods